INTERNET ACCESS E-SERVER : INTERNET APPLICATIONS
Ed. 042/14 Réf. 3EH 21000 BSAA
The information required to install the Internet access varies according to the type of connection to be
established.
All this information is described below.
- Connection account
This account is used when identifying the connection to the IAP. This account is unique, and is use
to identify oneself when connecting to the access provider by giving the account and the related
password.
• "Login": account delivered by the access provider. This account is used during the PAP/CHAP
authentication process when connecting to the IAP. This account, a form of security used by the
access provider, must be entered only once in Alcatel OmniPCX Office. It must not be confused
with the user account and password, the parameters that are entered when requesting access
to a Web site, and that allows the number of users with Internet access to be controlled. So
there are two level of authentication:
- authentication (client terminal) managed by Alcatel OmniPCX Office for each Internet user
in the company.
- authentication (Alcatel OmniPCX Office) managed by the access provider. Internet access
is access that is shared by all users. Consequently, this authentication is unique and trans-
parent for the users.
- “Password”: password linked with the connection login.
- Access provider's telephone number
ISDN connection DSL model connection LAN to LAN routing connec-
tion
Login
Password
Primary and secondary tele-
phone number
Bandwidth
Type de connection
IP address
Primary and secondary name
server
Login
Password
Connection protocol
- If PPPoE:
• Type de connection
-If PPTP
• IP address of modem
•Network mask
- IP address of system
Primary and secondary name
server
IP address of router
IP address of system
Network mask
Primary and secondary name
server
To Next Page
Loading...
Need help?
General