File
5
CALL METERING SERVICESAPPLICATIONS
Ed. 04 19/30Réf. 3EH 21000 BSAA
MODE 1 character
Dialing mode
- M: manual dialing
- I: individual (or personal) speed dial numbers
- R: collective speed dial numbers
RING 5 characters
Duration of the ringer, for all incoming ringing phases, made up of 2 x 2
numbers separated by ":"
COST 10 characters
Cost of the communication including ISDN service activation, where appli-
cable
BUSIN CODE 16 characters (right justified)
Charge account code specific to the communication
SUBSCRIBER NAME 16 characters
User name:
- outgoing call: caller
- incoming call: called party
- name associated with the account code
NODE Field not used
OPE. 1 character
Operator identifier
INITIAL USER 9 characters (left justified)
Same functions as field 1; employed when using an 8-digit numbering plan
CHARGED USER 9 characters (left justified)
Same functions as field 2; employed when using an 8-digit numbering plan
LINE 4 Field used instead of LINE when identification requires 4 characters; in this
case, the NXX and VXX identifiers from the LINE field are replaced by N**
and V**.
To Next Page
Loading...
