File
5
CALL METERING SERVICESAPPLICATIONS
Ed. 04 25/30Réf. 3EH 21000 BSAA
USING THE EURO
This paragraph describes the configurations which need to be carried out to accommodate for the fu-
ture integration of the Euro in several European countries.
The following parameters need to be configured:
T the conversion rate with the current currency of the country:
T Specify whether the public network operator carries out this conversion at the same date.
T the label used ("EUR", for example):
T the date and time of the conversion:
At the date and time specified, the system will manage the following Euro conversions:
- partial counters and accumulators of sets and meter credit for Hotel clients.
- basic meter charge cost and cost thresholds (Business and Hotel), cost of VAT (Hotel).
- cost of metering reminder.
If the public operator carries out the conversion, then the conversion report between the system cur-
rency and the public network currency is equal to 1, and the following parameters are to be configu-
red:
- real cost of the metering unit.
- cost of UUS and PABX forwarding.
- By MMC-PM5 (Expert View), select: Metering -> Currency Conversion -> Exchange Rate
- By MMC-PM5 (Expert View), select: Metering -> Currency Conversion -> check o No Con-
version, o User Defined or o Immediately
- By MMC-PM5 (Expert View), select: Metering -> Metering -> Metering Options for Inactive
Currency -> Currency Name
- By MMC-PM5 (Expert View), select: Metering -> Currency Conversion-> Conversion Date
& Time (only on selecting o User Defined
To Next Page
Loading...
Need help?
General