GENERAL COMMANDS MMC STATION
Ed. 044/8 Réf. 3EH 21000 BSAA
1st display: enter the international prefix, validate.
2nd display: enter the area prefix, validate.
3rd display: enter the call back prefix (4 digits max, number of trunk group used to make an outgoing
call from the directory of callers), validate.
REACTION ON TRANSFER FAILURE - MASREC
Press .
By pressing successively on , you can choose the destination station to which the call will be routed
during a transfer failure: ATTENDANT RECALL or MASTER RECALL (initiator of the transfer).
READ/WRITE IN MEMORY - RD/WR
makes it possible to read the contents of the system RAM memory noteworthy addresses.
Modification of these contents makes it possible to parameterize certain particular system operations.
Entering a value at the wrong address may result in deterioration of system operation.
Write in memory - MEMORY
makes it possible to modify the value of a noteworthy address. Enter the address (8 characters
maximum) then validate.
Softkeys A, B, C, D, E and F are used to enter the hexadecimal noteworthy address.
Read memory (except timers and maintenance and debug addresses) - ADDRES
makes it possible to read the contents of the system noteworthy addresses, except for the addres-
ses which concern timers and maintenance and debug features.
makes it possible to position yourself on any index.
Reading the timers - TIMER
makes it possible to read the contents of the noteworthy addresses concerning the system timers.
INSTALLATION NUMBERS - INSNUM
makes it possible to define the Alternative CLIP number and the public and private numbers
of the installation.
: number up to 20 digits max, separators * not included; the * character separates the different
fields: country indication, area number (optional field depending on country), PABX number. The size
of the field depends on the country.
: number up to 10 digits max. without separators.
MA
RE
A
CHOICE
RD
WR
A
M ADR
T
IN
N
M
A
To Next Page
Loading...
Need help?
General