Alcatel OmniPCX Office - Page 825

File
4
GENERAL COMMANDSMMC STATION
Ed. 04 7/8Réf. 3EH 21000 BSAA
DOWNLOADING - DOWNLD
Press .
makes it possible to configure the date, the time and the software switchover mode:
: date of switchover
: time of switchover
: switchover mode; by successively pressing on , define the switchover operating mode:
- normal with data saving
- normal without data saving
- forced with data saving (no restoration of the old version in the case of a transfer failure).
makes it possible to read the software references of the CPU board:
: current CPU software reference
: new CPU software reference
FAX NOTIFICATION TABLE - FAXTAB
This 30-entry table defines the relationships between the user numbers to be notified by a message in
an incoming fax which is intended for them and the number of the receiving fax machine.
Press .
makes it possible to define the number of the station to be called (sending a message saying
that a fax has arrived).
makes it possible to define the number of the fax machine concerned.
DTMF END-TO-END SIGNALLING - MFTRAN
Press .
: by successively pressing this key, you can define whether the DTMF end-to-end signalling is ap-
plied globally for all users, for no user or whether the passage in DTMF end-to-end signalling is carried
out individually for the stations.
D
O
WNL
D
A
SWAP
DATE
TIME
MODE
CHOICE
S
WVER
S
CU
RENT
O
THER
FAXTAB
A
RE
SU
B
S
FAXN
U
M
MFTRAN
A
CHOICE