Alcatel OmniPCX Office Technical Documentation

ANALOG LINES AND DIGITAL
ACCESSES
MMC STATION
Ed. 044/4 Réf. 3EH 21000 BSAA
DIGITAL ACCESSES
: for T0/T2/DLT2 accesses, state the number of incoming (INC) or outgoing (OUT) channels
as well as the total number of channels (value non modifiable for T0 access), then validate; the number
of mixed (MIX) channels is deduced from the other data.
makes it possible to read the current access status: In Service, Out of Service, Physical OOS/
Logical OOS or Physical OOS/Logical IS.
Choosing INSERV + OK sets the access to LOGICAL IN SERVICE.
Choosing OUTOFS + OK sets the access to PHYSICAL OUT OF SERVICE/LOGICAL OUT OF SERVICE.
: enter the DDI number of the destination station or hunting group for calls in normal
mode. A second similar display is presented indicating the destination for calls in restricted mode.
makes it possible to define barring and traffic sharing link categories for each access.
NNV : barring link category for data communications in normal mode
RNV : barring link category for data communications in restricted mode
NV : barring link category for voice communications in normal mode
RV : barring link category for voice communications in restricted mode
N : traffic sharing link category in normal mode
R : traffic sharing link category in restricted mode
Enter a value from 1 to 16 to assign to the category concerned then validate.
makes it possible to define the collective speed dial numbers which can be transmitted
on each access. For example, an access with category 10100000 may be used to transmit speed dial
numbers in the speed dial rights and traffic sharing categories.
: speed dial rights link category for voice communications in normal mode
: speed dial rights link category for data communications in normal mode
: speed dial rights link category for voice communications in restricted mode
: speed dial rights link category for data communications in restricted mode
: by successively pressing this key, you can define whether the station concerned has the right (1)
or not (0) to access the chosen directory list (NV, NNV, RV, RNV), then validate.
B
C
HAN
B
OU
TIN
S
B
A
CALDIS
B
A
C
ATE
GO
A
A
REPENT
A
NV
NNV
RV
RNV
FEATUR

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing