File
16
NUMBERING PLANSMMC STATION
Ed. 04 3/6Réf. 3EH 21000 BSAA
The VisAl, VisFr, Disa and Audtx functions are only provided in the public numbering plans (normal
and restricted mode).
: by successively pressing this key, state whether the number is private or not; this parameter is
only used for the Subsc, Main trunk groups and Secondary trunk groups functions.
makes it possible to enter the index (1 to 32) of the NMT table; enter 33 to retain the initial value
(without modifications) for the Main trunk group and Secondary trunk group functions.
makes it possible to enter the number which starts the range (0 to DDDD). The characters *, #,
A, B, C, D are allowed in the fixed part of the range but not in the variable part (A00 to A99; 100 to
10B: incorrect).
makes it possible to enter the number which ends the range (0 to DDDD).
: used for working out the directory number. The base is included between 0 and 9999. For the
functions which use the base, the calculation is done as follows: Directory number = Dialled number
- Begin + Base
followed by the destination Fax number: makes it possible to associate the user’s DDI number
with the Fax number to which incoming Fax calls must be routed. This function is only provided in the
public numbering plan.
FEATURES IN CONVERSATION - CODE
These codes make it possible to access services during an established call.
Press .
: makes it possible to enter the features in conversation value
Accou Business account code for new outgoing call
Disa DISA Transit
Appmt Appointment reminder / Alarm
CLoop Loopback of dialling into current numbering plan YES (1 to 32)
Main Change of numbering plan (loopback of number in the
main numbering plan)
YES (1 to 32)
VisAl Temporary allocation of a DDI number to a room
VisFr Cancellation of the allocation of a DDI number to a
room
RoomS Room status
Replc Station replacement
Move Station movement
OwnVM Mailbox call
Audtx Audiotex service DDI number YES
PRIVAT
TMN
BE
IN
END
BA
E
FAXR
A
N
MBER