MULTI REFLEXES MMC STATION
Ed. 042/2 Réf. 3EH 21000 BSAA
MULTI REFLEXES STATUS - OUTINS
lets you switch the Multi Reflexes off and then on again. Reminder: a Multi Reflexes is switched
on automatically (as in the case of a Reflexes station).
If the secondary UA interfaces (see DETAIL function) are not declared as off, the Multi Reflexes cannot
be switched off.
A Reflexes station cannot switch off the Multi Reflexes it is connected to.
The Multi Reflexes can be:
- In Service
- Out of Service
- Physical OOS/Logical OOS: Multi Reflexes not operational
- Physical OOS/Logical IS: Multi Reflexes not seen by the system (not declared or disconnected) or
switched off by the installer
STATUS OF SECONDARY UA INTERFACES - DETAIL
makes it possible to read the last 3 digits of directory numbers and declare the 3 secondary UA
interfaces of the Multi Reflexes as on/off.
and make it possible to modify the state of each secondary UA interface.
SOFTWARE VERSION - FIRMID
makes it possible to read the software version embedded in the Multi Reflexes.
ERASING OF DATA - DELSET
makes it possible to delete all Multi Reflexes data (this operation is only possible after the Multi
Reflexes is switched off.
TIN
DETAIL
INSERV
OUTOFS
FIRMID
To Next Page
Loading...
Need help?
General