Alcatel OmniPCX Office Technical Documentation

File
5
SYSTEM MESSAGESMAINTENANCE
Ed. 04 5/24Réf. 3EH 21000 BSAA
58 ISDN BOARD FAULT
A level 1 error was detected
by the board's OBC
Board lo-
cation.
Access
marker
INFO 0 =type of error (not significant)
72 UNSUCCESSFUL ATTEMPT
TO PRINT
Message emitted by the for-
matter (printer) after every 5
failed print attempts.
Check the
printer
and its
connec-
tion ca-
ble.
103 OBC FAULT Board lo-
cation.
INFO 0 and 1 = type of fault
200 4070 IO/EO BASE: SLAVE
LINK CONNECTED TO IN-
VALID INTERFACE
Board lo-
cation.
Interface
marker
INFO 0 = interface number invalid
INFO 1 = base station operating sta-
tus
Check the
cables on
the 2nd
link in the
base sta-
tion
201 4070 IO/EO
BASE: FREQUENCY REJEC-
TION
Discrepancy between the
number of frequencies con-
figured by the installer and
the number of DECT fre-
quencies processed
Board lo-
cation.
Interface
marker
INFO 0 to 3 = bitmap of frequencies
authorized and in use
202 4070 IO/EO BASE: LOSS
OF SYNCHRONIZATION
ON UA LINK 0
Board lo-
cation.
Interface
marker
INFO 0 = link status (0 = link KO; 1
= link OK)
203 4070 IO/EO BASE: LOSS
OF SYNCHRONIZATION
ON UA LINK 1
Board lo-
cation.
Interface
marker
INFO 0 = link status (0 = link KO; 1
= link OK)
204 4070 IO/EO BASE: NO RE-
PLY ON DSP PRESENT (RE-
SET)
Board lo-
cation.
Interface
marker
TYPE MESSAGE LOCA-
TION
ADDITIONAL INFORMATION ACTION

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing