SYSTEM MESSAGES MAINTENANCE
Ed. 048/24 Réf. 3EH 21000 BSAA
HISTORY MESSAGES
The events identified by the codes in the system history messages table concern modifications to the
system hardware configuration (appearance/disappearance of boards or terminals, refusal of a board
on exceeding equipment limits) or other events (reset execution, buffer fill rate attained, etc).
When the table is full, a new event is memorized in place of the oldest message.
This table is only emptied in the event of a cold system reset.
TYPE MESSAGE LOCA-
TION
ADDITIONAL INFORMATION ACTION
0 SYSTEM REBOOT INFO 0 = cause of reboot
-1: MMC reset command
- 2: reset due to hardware fault
- 3 to 5: reset following softwa-
re problem
- 7: reset following software
key problem (the values of
the default key are used)
- 11: reset following software
swap or after restoration (fol-
lowing swap)
- 12: too many one-way com-
munications
- 13: automatic reset pro-
grammed by MMC
- 14: timeout expiry
- 55: normal reset
1 DOWNLOAD INFORMATION CPU (80) INFO 0 = information
- 1: begin download
- 2: download finished
- 3: download failure
INFO 1 = cause of failure
- 0: download complete
-9: date invalid
- 11: file transfer error
- 14: download incomplete
To Next Page
Loading...
Need help?
General