Rockwell Automation Publication 2198-UM001I-EN-P - May 2019 137
Configure and Start the Kinetix 5500 Drive System Chapter 6
The Motion Axis Parameters dialog box appears.
7. From the Parameter Group pull-down menu, choose Frequency
Control.
8. Set the FluxUp, SkipSpeed, VelocityDroop, RunBoost,
MaximumFrequency, MaximumVoltage and CurrentVectorLimit
attributes appropriate for your application.
See the corresponding section in Appendix D, beginning on page 227
,
for information and configuration examples regarding all of these topics.
9. Click OK.
To Next Page
Loading...
