Rockwell Automation Publication 2198-UM001I-EN-P - May 2019 93
Connect the Kinetix 5500 Drive System Chapter 5
Table 43 - AOP Installation Requirement
Install the Kinetix 5500 Add-On Profile
Add-On profiles (AOP) are available for download at the Custom Downloads
Add-On Profiles website: https://download.rockwellautomation.com/esd/
download.aspx?downloadid=addonprofiles
Follow these steps to download the Kinetix 5500 Add-On profile.
1. Login to the Custom Download Add-On Profiles website.
The Custom Download Files dialog box opens.
2. Check AOP for 2198-Hxxx CIP Motion Kinetix5500.
3. Click Download Now and accept the user license agreement.
If prompted to install the Download Manager, allow the installation.
4. Click the Add-On Profile icon and follow the download instructions.
5. Extract the AOP zip file and run Setup.
To access AOP downloads by using the Product Compatibility Download
Center (PCDC), see Install the Kinetix 5500 Add-On Profile
on page 114.
IMPORTANT To configure these additional motors and actuators (see Table 44
) with
your Kinetix 5500 servo drive, you must have drive firmware 2.002 or
later. Refer to Table 43
to determine if you need to install the
Kinetix 5500 Add-on Profile.
Drive Firmware Revision Logix Designer Application Version Kinetix 5500 AOP Needed?
2.002 or later
21.00 Yes
21.03 or later
(1)
(1) If you are planning to use drive firmware revision 4.001 or later, see Version History on page 113.
No
To Next Page
Loading...
Need help?
General
