132 Rockwell Automation Publication 2198-UM001I-EN-P - May 2019
Chapter 6 Configure and Start the Kinetix 5500 Drive System
Basic Volts/Hertz Method
1. Configure the General tab and Motor tab as shown in General and
Motor Categories on page 130.
2. Select the Frequency Control category.
3. From the Frequency Control Method pull-down menu, select Basic
Volts/Hertz.
4. Enter the Basic Volts/Hertz attribute values appropriate for your
application.
Default values are shown.
5. Click Apply.
6. Select the Parameter List category.