134 Rockwell Automation Publication 2198-UM001I-EN-P - May 2019
Chapter 6 Configure and Start the Kinetix 5500 Drive System
Sensorless Vector Method
1. Configure the General tab and Motor tab as shown in General and
Motor Categories on page 130.
2. Select the Frequency Control category.
3. From the Frequency Control Method pull-down menu, select Sensorless
Vec t or.
4. Enter the Basic Volts/Hertz attribute values appropriate for your
application.
Default values are shown.
5. Click Apply.
6. Select the Parameter List category.
7. The Motion Axis Parameters dialog box appears.
8. From the Parameter Group pull-down menu, choose Frequency
Control.
To Next Page
Loading...
