146 Rockwell Automation Publication 2198-UM001I-EN-P - May 2019
Chapter 6 Configure and Start the Kinetix 5500 Drive System
Configure Bus-sharing Groups
Group 1 is a shared AC/DC hybrid configuration. The Bus Configuration for
the first two converter drives is Shared AC/DC. The Bus Configuration for
the inverter drives is Shared DC.
Figure 66 - Group 1 Converter Drives Configuration
Figure 67 - Group 1 Inverter Drives Configuration
ATTENTION: To avoid damage to equipment, all modules physically
connected to the same shared-bus connection system must be part of the
same Bus Sharing Group in the Logix Designer application.
To Next Page
Loading...
