To Next Page

To Previous Page

76 Rockwell Automation Publication 2198-UM001I-EN-P - May 2019

Chapter 5 Connect the Kinetix 5500 Drive System

Figure 38 - Impedance-grounded Power Configuration (WYE Secondary)

(1) The AC ground jumper is removed and the DC ground jumper is removed. See Figure 42 on page 79 for access to ground screws.

Figure 39 - Corner-grounded Power Configuration (Delta Secondary)

(1) The AC ground jumper is removed and the DC ground jumper is removed. See Figure 42 on page 79 for access to ground screws.

Refer to Power Wiring Examples beginning on page 194 for input power

interconnect diagrams.

Transformer

Three-phase

Input VAC

Phase Ground

Transformer (WYE) Secondary

Bonded Cabinet Ground

Ground Grid or

Power Distribution Ground

Kinetix 5500 Servo Drive

(top view)

Circuit

Protection

Connect to

Ground Stud

AC Screw

(1)

DC Screw

Transformer (Delta) Secondary