Anritsu MP2110A BERTWave - Chapter 3 Measurement Examples

3-1
3
Measurement Examples
Measurement Examples Chapter 3
This chapter explains examples of how to connect the MP2110A and the
DUT and their measurement procedures.
When changing the optical level input to the DUT such as the receiver
sensibility measurement, connect other measurement instruments such
as optical attenuator.
When using the MP2110A-030, 039, 040 or 049 option, replace the
connector names in this chapter as follows:
Ch A In → A
Ch B In → B
3.1
Measuring Bit Error Rate ............................................. 3-2
3.2 Measuring Waveform .................................................. 3-4
3.3 Measuring Multichannel Optical Module Bit Error Rate
................................................................................. 3-10