Anritsu MP2110A BERTWave - How to Discharge the Electrostatic Charges of the Coaxial Cable

2.7 Connecting Coaxial Cable
2-21
2
Before Use
2.7.2 How to Discharge the Electrostatic Charges of the Coaxial Cable
There is a risk of damaging MP2110A if the coaxial cable you connect to
MP2110A is charged electrostatically.
To prevent MP2110A from being damaged by ESD, discharge the
electrostatic charges of the coaxial cable by using the ESD Discharger,
which is an optional accessary of MP2110A, before cabling the connectors.
The ESD Discharger can be used with one of SMA connector, K connector,
and V connector (and its compatible connector).
Figure 2.7.2-1 How to Use the ESD Discharger