Anritsu MP2110A BERTWave - Appendix A Specifications

A-1
Appendix A
Appendix A Specifications
Appendix A describes the specifications for the MP2110A.
Only the specifications of the option installed at shipment are described
from Section A.2 “BERT” to Section A.4, “General Performance”. However,
the specifications of the retrofit option and the specifications of the option
installed at shipment are the same.
A.1
Configuration ............................................................. A-2
A.2 BERT ......................................................................... A-7
A.2.1 Common Performances ................................. A-7
A.2.2 Pulse Pattern Generator ................................. A-9
A.2.3 Error Detector .............................................. A-10
A.3 Sampling Oscilloscope ............................................. A-12
A.3.1 Channel Configuration.................................. A-12
A.3.2 Common Performances ............................... A-12
A.3.3 Time Setting ................................................. A-14
A.3.4 Measurement ............................................... A-16
A.3.5 Utilities ......................................................... A-21
A.3.6 Maintenance ................................................ A-21
A.3.7 Horizontal System ........................................ A-22
A.3.8 Digital System .............................................. A-22
A.3.9 Electrical Channel ........................................ A-23
A.3.10 Optical Channel ........................................... A-26
A.3.11 CRU (MP2110A-054) ................................... A-31
A.3.12 26G/53G CRU (MP2110A-055) .................... A-33
A.4 General Performance ............................................... A-35