Anritsu MP2110A BERTWave - Linking Measurement Settings for Multiple Channels

4.6 Linking Measurement Settings for Multiple Channels
4-21
4
Screen Operation
4.6 Linking Measurement Settings for Multiple
Channels
With the MP2110A-014, Ch Tracking is displayed in the application
screen.
To apply the PPG and ED settings for Ch1 to other channels, click
on. In
this state, altering settings for Ch1 also alters the settings for other
channels.
Figure 4.6-1 Ch Tracking
The following settings are linked:
Test Pattern
ED Tracking*
ED Gating Cycle (Repeat/Single/Untimed)
ED Gating Period
*: Setting Ch Tracking to
on sets ED Tracking to On. However, setting
Ch Tracking to off does not set ED Tracking to Off.