Chapter 4 Screen Operation
4-12
4.3.4 Initialize
Initializing measurement conditions
1. Click Initialize, and you are asked if you want to initialize all
settings.
2. To initialize the measurement conditions, click
OK. To cancel the
initialization, click
Cancel.
4.3.5 Panel Lock
Panel locking
Preventing screen operations at other than System Menu is called “panel
locking”.
1. Click
Panel Lock to lock the panel.
2. The screen elements other than
System Menu, status indicators, and
date and time display are shaded.
Even if the panel is locked,
System Menu and the power switch are
available.
When the panel is locked,
Local/Panel Unlock in System Menu is
available.
When the MP2110A is remotely controlled, the panel is locked.
4.3.6 Local/Panel Unlock
Unlocking the panel
1. Click
Local/Panel Unlock.
2. The
Remote status indicator turns off.
To Next Page
Loading...
