Anritsu MP2110A BERTWave - Power Connection; Power Requirements

2.3 Power Connection
2-13
2
Before Use
2.3 Power Connection
2.3.1 Power Requirements
For normal operation of the MP2110A, use the power voltage range
described below.
Table 2.3.1-1 Power Requirements
Power source Voltage range Frequency
100 Vac system
100 to 120 V
50 to 60 Hz
200 Vac system
200 to 240 V
50 to 60 Hz
Operating voltage: within the range of +10% to –15% from the rated
voltage (Max. AC 250 V).
Switching between 100 and 200 V systems is automatic.
CAUTION
Supplying power exceeding the above range may result in
electrical shock, fire, failure, or malfunction.