Chapter 8 Maintenance
8-30.
8.10 Transporting and Disposal
The following describes precautions for transporting and disposing of the
BERTWave.
Repackaging
Repack the MP2110A in the packing material (box) in which it was
delivered. If the packing material has been thrown away or damaged,
repack the MP2110A in the following manner:
1. Prepare a corrugated cardboard, wooden, or aluminum box large
enough to pack cushioning material in around the MP2110A.
2. Wrap the MP2110A in plastic or a similar material to avoid water
droplets and dust.
3. Put the MP2110A in the box.
4. Pack the MP2110A in cushioning material so it does not move in the
box.
5. Secure the outside of the box with packing cord, adhesive tape, bands,
or other similar materials.
Transporting
Avoiding vibrations as much as possible and meet the recommended
storage conditions during transport.
Disposal
Follow the instructions of your local waste disposal office when disposing
of the MP2110A.
Before disposing of the MP2110A, dismantle or physically destroy any
memory media it contains to ensure that any data saved in memory
cannot be recovered by third parties.
To Next Page
Loading...
