Chapter 2 Before Use
2-30
2.10 Precautions for Preventing Damage
CAUTION
• Always use the supplied 3-pin power cord to ground
both the MP2110A and DUT (included in test circuit).
After confirming that both the MP2110A and DUT are
grounded, use coaxial cables to connect them.
NEVER connect the MP2110A and DUT without
grounding, otherwise electrostatic discharge may
damage the MP2110A.
•
Do not touch the core conductor of the connector or
bring it into contact with metal. Doing so may damage
the input circuit of the MP2110A.
To Next Page
Loading...
