Chapter 2 Before Use
2-2
2.1 Unpacking and Installation
2.1.1 Unpacking
At unpacking, check that all items are included. Contact an Anritsu
Service and Sales office if any parts are missing or damaged. Keep the
original packaging materials. They are required when transporting the
BERTWave in future.
For repacking the MP2110A, refer to 8.9, “Transporting and Disposal”.
The options listed in Table 1.2.2-1 are provided for the MP2110A. Verify
that the options purchased are installed.
To install some options, the MP2110A might be returned to Anritsu
factory. For the specifications, refer to Appendix A “Specifications”.
2.1.2 Installation
Install the BERTWave horizontally as shown in Figure 2.1.2-1.
Figure 2.1.2-1 Installation Orientation
To Next Page
Loading...
