Anritsu MP2110A BERTWave - Page 429

A.3 Sampling Oscilloscope
A-33
Appendix A
A.3.12 26G/53G CRU (MP2110A-055)
Table A.3.12-1 Optical Data Input
Item Specifications
Fiber
Singlemode fiber
Wavelength
1260 to 1620 nm
Data Format
NRZ, PAM4 available
Operation Baud Rate
51.0 to 58.0 Gbaud
25.5 to 28.9 Gbaud
Sensitivity (for 53G)
TypicalOuter OMA 100 µW*
1
Max. Outer OMA 265 µW*
2
Sensitivity (for 26G)
TypicalOuter OMA 100 µW*
3
Max. Outer OMA 265 µW*
4
Stress Signal
Sensitivity
Typical Outer OMA 630 µW*
5
Absolute Maximum
Power
+9.0 dBm (Average)
+12.0 dBm (Peak)
Optical Return Loss
Typical –30 dB*
6
Tolerance against
consecutive 0s
500 bits or more at Zero Substitution Pattern PRBS 2
15
–1
Connector
FC/PC
*1: 53.125 Gbaud, PRBS13Q, PAM4, LBW = 4 MHz, TDECQ < 2.0 dB, at
25±5°C
*2: 51 Gaud, 53.125 Gbaud, 58 Gbaud, PRBS13Q, PAM4, TDECQ < 2.0
dB, LBW = 4MHz
*3: 26.5625 Gbaud, PRBS13Q, PAM4, LBW = 4 MHz, TDECQ < 2.0 dB,
at 25±5°C
*4: 25.5 Gbaud, 26.5625 Gbaud, 28.9 Gbaud, PRBS13Q, PAM4, TDECQ
< 2.0 dB, LBW = 4 MHz
*5: 53.125 Gbaud, SSPRQ, PAM4, LBW = 4 MHz, TDECQ ≈ 3.4 dB, at
25±5°C
*6: At 1310 nm
Table A.3.12-2 Data Out SMF Optical
Item Specifications
Insertion Loss
Typical 1.5 dB*
Max. 2.3 dB*
*: At 1310 nm