Ateis IDA8C User Manual

IDA8 Global-Net User Manual122
© 2020, ATEÏS. All rights reserved.
Name: The name of PCP object, click to rename.
RS485 Target: Indicates the connector on audio processor that PCP connected in the design
window.
Talk Mode: Specify the behavior of key pressing for paging. There are two modes:
o Push: Push and hold the key for paging request, release the key to end paging.
o Lock: First push for paging request, if request is grant then start paging, push again to
end paging.
Key-Priority: The priority of key.
Key-Count: To specify how many keys on PCP.
Pre-Announcement:
o Enable: Tick/Untick the checkbox to enable/disable pre-announcement chime playing.
o Name: Display the name of the message.
Post-Announcement:
o Enable: Tick/Untick the checkbox to enable/disable the post-announcement chime
playing.
o Name: Display the name of the message.
Announcement: Open announcement message settings window:
o New: The announcement message for creating new entry in the list. Type a name in the

Ateis IDA8C Specifications

General

Brand	Ateis
Model	IDA8C
Category	Security System
Language	English