System Products 81
© 2020, ATEÏS. All rights reserved.
DSP Component Configuration
The audio of PSS-AS needs to be routed from using the [Network Paging] component for paging
processing. See the following example.
Pin A~D of RS485 Input component is corresponded to PPM AS 1~4 audio plugged in PDC1~4
respectively. Network Paging component processes paging request coming from various sources,
and determines which sources are allowed to paging to zones it desired. The zones are M1~M8 on
Network Paging component. The integration paging event needs to be created and linked with PSS
AS, see DSP Components > Network Paging to know the paging settings.
Event Manegement
There are various types of events for controlling the Ateis devices, see Event Management to set
up and adjust the elements which links with a controller.
To Next Page
Loading...
Need help?
General
