• Enable the debug tracing to monitor MSTP BPDUs exchanged between Cisco and the
SR2330/4134 using the debug spanning-tree packet <transmit|receive>
command.
Ports configured as Port Fast BPDU Guard are in Disable Discarding states
Make sure the port in not receiving any BPDUs. Use debug tracing to monitor the packets
received by port with the debug spanning-tree packet <transmit|receive>
command.
Troubleshooting a Data Link Layer problem
80 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
