Azbil Corporation Maintenance and Troubleshooting
Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter 5-15
Safety precautions
Introduction
Correct operation is necessary for the safe and ecient use of the SFC and MagneW
FLEX+/PLUS+ Carefully read the safety precautions described in this user's manual and
have a thorough understanding of it before operating the product.
Operating precautions
For safe use of the instrument, this manual uses the following symbols:
WARNING
Denotes a potentially hazardous situation, which is not avoided could result in
death or serious injury.
CAUTION
Denotes a potentially hazardous situation which if not avoided could result in
minor injury or damage to device.
Examples of symbol
The symbol indicates a specic action that is prohibited to prevent danger.
The prohibited action (prohibition of dismantling in the case of the gure
at left) is indicated by a symbol or next to the symbol.
The symbol indicates a specic action that is mandatory to prevent danger.
The mandatory action (the plug should be removed from the socket in the
case of the gure at left) is indicated by a symbol.
CAUTION
Set the loop of the electromagnetic ow meter whose setting is to be changed to
“manual” before starting communication with the SFC. Its output may change due
to a communication signal, aecting the operation or control of the plant.
CAUTION
Do not throw the battery for the SFC into re. This may result in explosion.
Be sure to remove the AC adapter for the SFC from the socket if it is not used.
The AC adapter may be over heat.
To Next Page
Loading...
Need help?
General
