Azbil MagneW FLEX+/PLUS+ MGG10C - Analog Output and Digital Output

Azbil Corporation Introduction
Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter 1-3
Analog output and digital output
Introduction
The choice of either an analog output or digital output system conguration depends
on whether or not you want to use the digitally enhanced (DE) communication mode.
Analog output (4 to 20 mA DC output)
In analog mode, the owmeter sends the instantaneous ow rate as a proportional 4 to
20 mA output signal to a controller or a recorder in the control system.
Digital output (DE output)
A owmeter in the DE mode can communicate in a direct digital fashion with Azbil
Corpotation or Honeywell DCS system. The digital signal can include ow rate,
owmeter database, and self-diagnostics.
Switching output mode
The analog/digital output mode is selectable.