Azbil MagneW FLEX+/PLUS+ MGG10C - Connecting Power; Figure 2-28 Name Plate

Installation Azbil Corporation
2-24 Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter
Connecting power
WARNING
ELECTRIC SHOCK HAZARD! DO NOT perform wiring work while the power
is ON!
Commercial power (AC100~120, 200~240V, 50-60Hz) or a 24 VDC ± 10% power
supply is required for this system. The power supply specication is shown on the
name plate of your converter.
Figure 2-28 Name plate
The 24 VDC converter has a terminal marked “POWER DC24V” instead of
“POWER,” as on the remote converter.