Azbil MagneW FLEX+/PLUS+ MGG10C - Wiring

Azbil Corporation Installation
Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter 2-5
Wiring
CAUTION
Use electrical tube and duct to prevent water entry and protect the cable from
external damage.
CAUTION
Be sure to use a waterproof gland at the conduit connection to prevent water entry
inside of the terminal box and prevent output errors.
CAUTION
Turn o the power supply before connecting the cables to the converter.
The converter can be damaged. This type of damage is not covered by Azbil
Corporation’s warranty.
CAUTION
Be sure to plug all unused conduit connections with a water tight plug.
CAUTION
In case that a remote model is installed in a ship, the cables between the converter
and detector must be covered with a exible metal conduit.