Azbil MagneW FLEX+/PLUS+ MGG10C - Setting the TAG no; Default Setting; Setting Range

Using the display panel Azbil Corporation
4-12 Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter
Setting the TAG NO.
This function sets the TAG NO. of the owmeter.
Default setting
XXXXXXXX
Setting range
8 characters max. Alphanumeric characters, -, @, and space can be set.
Step
Screen
Procedure
(English) (Japanese)
1
ENTER BASIC SETUP
YES OR NO
Enter the BASIC SETUP
MODE. (See page 4-11)
2
TAG
XXXXXXXX
In the BASIC SETUP MODE,
the TAG NO. screen is the rst
screen that appears.
3
TAG
XXXXXXXX
Touch the key until the
cursor is at the character to be
changed.
4
TAG
FXXXXXXX
Touch or key to change
the character.
5
TAG
FIC-0001
Touch the key until the
cursor is back at the mode
indicator.