Azbil MagneW FLEX+/PLUS+ MGG10C - Page 57

Azbil Corporation Using the display panel
Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter 4-3
Table 4-1 Mode functions
Mode Description
ADVANCED MODE
Mode indicator:
This mode is used to apply some specic noise
immunity functions.
This mode includes:
Damping
Manual zero
Averaging
Auto spike Cut
Coecient
Drop out
Low-ow cut o
Flow direction change
CAUTION
The CALIBRATION MODE and ADVANCED MODE contain adjustments and
operations that are very important for proper ow rate measurement. Improper
settings in these modes will prevent measurement.