18. Specifications
Noise Level
dB(A) @ 1 m:
67.6 dB(A )
62 dB(A) (half fan s peed)
3D systems
Active glasses s ystems and polarization systems on silver sceens are supported. Color
separation systems (Dolby3D and 6P) are not supported.
Safe ty requ irements Class 1 risk group 3
Show sa fety: the customer shall take precaution for the laser safety (respect the hazard
distance and sepa ration height) according to local laser show safety regulations.
Workplace safety: the customer shall take precaution for:
• workplace safety as prescribed by the local authorities
• basic laser safety training for operators
• laser safety program implementation in the company;
• access limitation only to trained personnel: area labelling, etc.
18.5 Specifications of the DP4K-17BLP
Overview
Brightness
17,000 lumens (typical)
Native contrast ratio
2,000:1 (typical)
Prime lenses 1.13-1.72; 1.35-1.86; 1.46-2.10; 1.65-2.60; 1 .95-3.26; 2.53-4.98
Resolution 4,096 x 2,160
Long-term brightness stability
30,000 hrs @ average usage conditions
Dimensions (WxLxH) Projector: 754 x 1,129 x 604 mm / 29.69 x 44.5 x 23.78 inche s
Cooler: 561.5 x 738 .5 x 348 mm / 22.11 x 29.07 x 13.7 inches
Weight
Projector: 144kg (318 lb)
Cooler: 32 kg (70.6 lb)
Cooling liquid hose length 4 hoses; 0.5m, 2.5m, 5m, and 8m (1.6ft/8.2ft/16.4ft/26.2 ft)
Vertical separation between
cooler and projector
Maximum 3m (10ft) (higher or lower)
Power requirements Projector: single phase 200-240V 15A
Cooler: obtains power from the projector
Heat load (max. po wer) 7526 BT U/h
Ambient temperature
35°C (95°F) Max. (projector and cooler)
Ambient humidity
85% Max. (projector and co oler)
Po we r cons umpti on
Projector (incl. cooler): 2.4 k W
Media serve r
Barco Alchemy ICMP and other IM B brands supported.
Noise Level
dB(A) @ 1 m:
67.6 dB(A )
62 dB(A) (half fan s peed)
3D systems
Active glasses s ystems and polarization systems on silver sceens are supported. Color
separation systems (Dolby3D and 6P) are not supported.
Safe ty requ irements Class 1 risk group 3
Show sa fety: the customer shall take precaution for the laser safety (respect the hazard
distance and sepa ration height) according to local laser show safety regulations.
Workplace safety: the customer shall take precaution for:
• workplace safety as prescribed by the local authorities
• basic laser safety training for operators
• laser safety program implementation in the company;
• access limitation only to trained personnel: area labelling, etc.
168 R5906753 DPXK BLP SERIES 20/11/2017
To Next Page
Loading...
