EasyManua.ls Logo

Barco DP2K-36BLP - ICMP Communication Ports

Barco DP2K-36BLP
185 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. ICMP
9. ICMP
About this chapter
This c hapter describes the ICMP in general, the HDDs, the input ports and the communication ports. Furthermore, the s tatus LEDs
are described and the im portance of the device certicate is illustrated.
Image 9-1
Overview
ICMP introduction
ICMP HDD
ICMP communication ports
ICMP source input ports
ICMP DisplayPort specications
ICMP SDI specications
ICMP HDMI 2.0 specications
ICMP HDMI 1.4 specications
ICMP status LEDs
ICMP HDD status LEDs
•ICMPconguration via Comm unicator
ICMP reset
Removing a HDD from the ICMP
Installing a HDD into the ICMP
9.1 ICMP introduction
About ICMP
The ICM P is a removable elec tronic ass embly situated in the Card Cage of the projector. The ICMP stores, decrypts and decodes
DCI c inema content and delivers it to the projector in a usable format, all integrated into a single assembly plac ed directly in the
projector. ICMP is a fully integrated assem bly
so ex pected by the operators to facilitate their daily business.
The standard Integrated Cinem a Processor functionality from Texas Instruments® is fully integrated into the ICMP. So, the ICMP
replaces the ICP board as w ell.
R5906753 DPXK BLP SERIES 20/11/2017
93

Table of Contents

Related product manuals