Barco DP2K-36BLP - Connecting a UPS to the Projector Electronics

4. Physical installation projector
Connect directly (A) or drag the cable behind the front cover so that the front cover c an be removed without rem oving the UPS
INLET cable (B).
1
2
A
B
Image 4-15
UPS connection
3. Secure the UPS inlet s ocket with a fixation spring. Handle as follow:
- Squeeze t he fixation spring together.
-Slidethefixation spring on the fixation pins while squeezing together and push it against the power plug.
- Release the fixa tion sp ring.
4. Install on the power outlet the second fixation spring to prevent losing it (2).
CAUTION: T he electrical con nection w ith the UPS INL ET socket of the projector must b e done w ith a c ertified
AC power supply cord (minimum 0,75 mm² or 18 AWG and minimum 300V)
CAUTION: Do not use the power OUTLET socket of the projector to provide power to other equipment!
R5906753 DPXK BLP SERIES 20/11/2017 35