6. Physical installation stand alone cooler
Note: The two U -Brackets are not fixed in same manner. Here, the concerned U-bracket, is situated in the lower left corner of
the housing when you look at the d evice on the side of the c ooler inputs.
Image 6-13
3. F ixate the second U -bracket to the frame with only one screws (M5x8) as shown in the following drawing. There is a space of
more or less 2 centimeters between the frame side and the br acket.
Note: The two U-Brackets are not fixed in sam e manner. Here, the concerned U-bracket, is situated in the lower right corner of
the housing when you look at the d evice on the side of the c ooler inputs.
+/- 2cm
Image 6-14
4. F ixate the bracket situated to the backside of the co oler hous ing with only one screws (M5x8) each.
R5906753 DPXK BLP SERIES 20/11/2017
57
To Next Page
Loading...
