Calrec Apollo - Source Offline indication on a path

CALREC Putting Sound in the Picture 201
Source Offline indication on a path
In the Assign display if the source
assigned to that fader is taken offline
this is indicated by means of a Red
exclamation mark as shown in Fig. 3
below.
The display shows that both sources for
the A and B paths are offline.
Intermittent Cable Failures
If intermittent cable failures exist on the
system, the System Status screen now
displays these as new messages and
when the user clicks on the message,
a 30 second timer starts which
automatically clears the intermittent
error from the message list.
FIG 2 - SURFACE FAIL WARNING
CANCEL
REH
ON
AIR
DARK
APFL
RESETRESET
RESET
USB
FAIL WARNING
DSPSURFACE
CONTROL
TB MIC
CANCEL APFL
ENABLE
REH
O
N
AIR
DARK
APFL
RE
S
ET
R
E
S
ET
R
ESET
U
SB
D
SP
SU
RFA
CE
CO
NTR
O
L
T
B MI
C
C
AN
C
EL APFL
ENABLE
FIG 3. - SOURCE OFFLINE INDICATION