Calrec Apollo - MEMORY ISOLATION

CALREC Putting Sound in the Picture 177
MEMORY ISOLATION
Memory isolation allows certain paths
and ports to have all or some of their
settings protected from any memory
load operations.
Isolate settings are stored in the
continuous memory of each show,
therefore each show may have different
isolate settings.
Basic path isolation
Paths may be isolated using the MEM
ISO button in the button cells above each
fader as shown in Fig 1. With this function
selected on a fader, the paths on that
fader will keep their current settings when
a new memory is loaded.
Fig 2 illustrates this. The MEM ISO
function on the first three faders have
been activated. These faders have been
highlighted to indicate that they will not be
altered by any memory load operations.
Setting the scope of memory
isolation
Isolating a path does not necessarily
mean that all settings associated with the
path are isolated. It is possible to only
isolate the EQ settings on a certain path,
just the EQ and input settings, or maybe
all or some of its routing.
FIG 1 - MEM ISO BUTTONS
FIG 2 - MEM ISO APPLIED TO FADERS