CALREC Putting Sound in the Picture 43
FIG 1 - SEND-ROUTE ASSIGNABLE PANEL MODE CONTROL LAYOUTThe Send-Route mode is also an
assignable panel mode, in that it
displays information for, and can
adjust parameters of the currently
assigned audio path.
Like the Processing mode, the currently
assigned path, and therefore the focus
of the control panel is shown on the TFT
screen.
This panel mode allows for the currently
assigned path to be routed to the various
buses / outputs that are available. The
TFT screen provides routing buttons and
displays whilst the panel below provides
colour coded rotary controls for send
levels to applicable outputs, such as
Auxs, Track sends and Direct outputs.
Pressing down on a rotary encoder
highlights that send in the bottom row of
controls providing further options such
as pre-fader / post fader switching. The
last two columns of control cells provide
pan controls for positioning of the path’s
output. See Fig 1.
SEND-ROUTE
To Next Page
Loading...
