Canon LBP352 - Registering Combinations of Frequently Used Print Settings

Registering Combinations of Frequently Used Print
Settings
0X7U-024
Specifying combinations of settings such as "1-sided landscape orientation on A4 size paper" every time you print may
be time consuming. If you register these frequently used combinations of print settings as "proles," you can specify
printing settings simply by selecting one of these proles from the list. This section describes how to register proles
and how to print using them.
Registering a Prole(P. 114)
Selecting a Prole(P. 115)
Registering a Prole
1
Change the settings that you want to register as a prole, and click [Add].
● Click the [Basic Settings], [Page Setup], [Finishing], [Paper Source], or [Quality] tabs to specify the print
settings on each screen as necessary. Various Print Settings(P. 85)
2
Enter a prole name in [Name], select an icon, and then click [OK].
● Enter comments on the prole in [Comment] as necessary.
● Click [View Settings] to see the settings to register.
Editing a
prole
● By clicking [Edit] on the right side of [Add] on the screen shown in step 1, you can change the name, icon, or
comment of the proles you have previously registered. You cannot edit the pre-registered proles.
Printing a Document
114