Loading Preprinted Paper
0X7U-011
When you use paper that has been preprinted with a logo, pay attention to the orientation of the paper when loading.
Load the paper properly so that printing is performed on the correct side of the paper with a logo.
Making 1-Sided Printouts on Paper with Logos(P. 55)
Making 2-Sided Printouts on Paper with Logos(P. 57)
● This section mainly describes how to load preprinted paper with the proper facing and orientation. For the
general procedure for loading paper in the paper drawer, multi-purpose tray, optional paper deck, or
optional envelope feeder, see the following.
Loading Paper in the Paper Drawer(P. 39)
Loading Paper in the Multi-Purpose Tray(P. 44)
Loading Paper in the Paper Deck (Option)(P. 47)
Loading Envelopes in the Envelope Feeder (Option)(P. 50)
Making 1-Sided Printouts on Paper with Logos
Printing on Paper with Logos in Portrait Orientation
When loading paper in the paper drawer or paper deck
Load the paper with the logo side (the side to print the document) face down.
Basic Operations
55
To Next Page
Loading...
