Canon LBP352 - Toner Save

Image Renement
*
Enable or disable the smoothing mode in which the edges of characters and graphics are smoothly printed. <Image
Renement> is not displayed when <Resolution> is set to <1200 dpi>.
Off
On
( ) <Print Quality> <Image Renement> <Off> or <On>
Toner Save
Specify this setting when you want to check the nishing such as the layout before printing a large job, for example.
Since this printing mode saves toner, ne lines and portions with lighter print density may become blurred.
Off
On
( ) <Print Quality> <Toner Save> <Off> or <On>
Density
*
Adjust the toner density to apply to printing. <Density> is not displayed when <Toner Save> is set to <On>.
Adjusting Print Density(P. 530)
-8 to 0 to +8
Density (Fine Adj)
*
You can make ne adjustment of the toner density applied to printing separately for three different density areas.
<Density (Fine Adj)> is not displayed when <Toner Save> is set to <On>. Adjusting Print Density(P. 530)
-8 to 0 to +8
Halftones
You can select the printing method to reproduce halftones (the intermediate range between the lighter and darker
areas of an image). Halftones can be specied for each image data type in a single document.
Text
Resolution
Setting Menu List
400