Canon LBP352 - Using TLS for Encrypted Communications

Using TLS for Encrypted Communications
0X7U-04F
You can encrypt communication between the machine and a Web browser on the computer and the IPP Print data to
print via Internet by using Transport Layer Security (TLS). TLS is a mechanism for encrypting data sent or received over
the network. TLS must be enabled when the Remote UI is used for specifying settings for IPSec (Pre-Shared Key
Method), IEEE 802.1X authentication (TTLS/PEAP), or SNMPv3. To use TLS encrypted communication, you need to set a
key pair and enable the TLS function. Have a key pair to use ready (
Conguring Settings for Key Pairs and Digital
Certicates(P. 315) ).
1
Start the Remote UI and log on in Management Mode. Starting Remote UI(P. 333)
2
Click [Settings/Registration].
3
Click [Network] [TCP/IP Settings].
Security
294