Connecting to a Wired LAN
0X7U-02Y
Connect the machine to a computer via a router. Use a LAN cable to connect the machine to the router.
1
Connect a LAN cable.
● Connect the machine to a router by using a LAN cable.
● Push the connector in until it clicks into place.
2
Check that the LNK indicator ( ) is lit.
● When the LNK indicator does not light up. Problems with the Wired LAN Connection(P. 498)
3
Wait approximately 2 minutes.
● While you wait, the IP address is set automatically.
Network
185
To Next Page
Loading...
