Canon LBP352 - Job Timeout; Print Ps Errors

PS
0X7U-05W
All the settings about the PS control commands are listed with short descriptions.
Default settings are marked with a dagger (
).
Job Timeout(P. 439)
Print PS Errors(P. 439)
Halftones(P. 439)
Grayscale Conversion(P. 440)
Job Timeout
If the time specied in this item has elapsed since a job process was started, the machine automatically nishes the
job and receives the next job.
If you do not want to specify the timeout, specify "0 seconds."
0 to 3600 seconds
( ) <PS> <Job Timeout> Use the numeric keys to enter the setting
value
Print PS Errors
Species whether an error page should be printed when a PostScript error is occurring.
Off
On
( ) <PS> <Print PS Errors> <Off> or <On>
Halftones
You can select the printing method to reproduce halftones (the intermediate range between the lighter and darker
areas of an image). Halftones can be specied for each image data type in a single document.
Text
Resolution
Gradation
Setting Menu List
439