(
)
<Auto Select Drawer>
Select the paper source
<Do Not Use> or
<Use>
Paper source selection
Select the paper source to which you want to apply the Auto Select Drawer function.
Switching of the settings
Select <On> to enable automatic drawer selection for the paper source you selected on the previous screen
(
).
Default Paper Type
You cannot perform paper type setting on a computer running an operating system or a mobile device that does not
support any printer driver. If you want to print from such computer or mobile device, use this item to set the type of
the paper to print on.
Plain
Plain L
Plain L2
Heavy 1
Heavy 2
Heavy 3
Envelope
Envelope H
Labels
( ) <Default Paper Type> Select the paper type
Paper type selection
Specify the settings in the same way as the paper settings in the printer driver according to the paper type
for printing.
Loading Paper(P. 37)
Setting Menu List
457
To Next Page
Loading...
Need help?
General
