Canon LBP352 - Application Key; Clear Key; Energy Saver Key; Feeder Selection Key

Ready indicator
Lights up when the machine is ready for printing or otherwise blinks.
Message indicator
● Lights up when a problem occurs to disable printing. Troubleshooting(P. 461)
● Lights up if the machine enters sleep mode while being off line.
Job indicator
Lights up when the machine is receiving print data or any print data remains in the memory of the machine.
Blinks when print data is being processed.
Energy Saver key
Press to put the machine into sleep mode. This key lights up in green when the machine is in sleep mode.
Press the key again to exit sleep mode. Entering Sleep Mode(P. 68)
Application key
Each press of this key cycles through the functions in the order of: Print Screen
MEAP1 MEAP2 ...
MEAP8 USB Direct Print Print Screen. Select the function you want to use. If you press this key without
logging on when department ID management is enabled, the authentication screen is displayed.
Feeder Selection key
Press to select the paper source or specify the paper size. Select Feeder Menu(P. 453)
[ID] key
Displays the login screen for using the MEAP function. After you nish using the machine, press this key
again to log off.
Clear key
Press to delete the entered numbers and text.
Online key
Switches between online mode (printing jobs are accepted) and oine mode (no printing job is accepted).
This key lights up green when the machine is online and goes off when the machine is oine. Usually, keep
the machine online, but set it to oine when specifying settings of User Maintenance(P. 406) in the
setting menu.
● If you do not operate the key for 2 minutes when the machine is oine and the Main Screen(P. 27) is
displayed, the machine automatically becomes online. You can select <Auto Reset Time> to change this
time value ( Auto Reset Time(P. 363) ).
[#] key
Press to enter symbols such as "@" or "/".
Basic Operations
25